Directly to the tool

Tool finder

Workpiece material

Machine

Applications

Features

Radius

Chamfer angle

Width

height

Thickness

Cutting material

Cutting material group

LEUCO product names

To the product names

Articles found: 10

Your can restrict your selection by using the other filters!

Reset

Selection via tool type

Scraper Knives HW with 2 cutting edges and radius - working centers (topcoat, chamfer to prevent material fracturing)

Product

Drawing

  • Tungsten Carbide [HW]

Article

Description

Machine / Application

  • machines Homag combined with flush-cutting unit No. 1-056-11-0621

Design

  • 6 degree profile run-out
  • cutting material: HW
  • HL Board 06 for wood-based panels, plastics and hard woods
  • topcoat coating
  • cutting edge with chamfer to prevent material fracturing

Advantages

  • no material fracturing also in the case of PP-edges
  • no additional work steps needed

Notes

Table- and picture caption ...

R
[mm] 		B
[mm] 		H
[mm] 		S
[mm] 		Ø d
[mm] 		Profile run-out
[°] 		LEUCODUR PU
[pc.] 		Remarks Ident-No. Comp./ Inqu.

Dimensions entered are not listed?
Please contact our application consulting .

available from stock
available on short notice
Delivery time on request

1,5 20 11.5 2 5,0 6 HL Board 06 2 180025 
|
2,0 20 11.5 2 5,0 6 HL Board 06 2 180020 
|
2,5 20 11.5 2 5,0 6 HL Board 06 2 180021 
|
3,0 20 11.5 2 5,0 6 HL Board 06 2 180022 
|
4,0 20 11.5 2 5,0 6 HL Board 06 2 185295 
|
1,0 20 11.5 2 5,0 6 HL Board 06 topcoat 2 topcoat + chamfer to prevent material fracturing 185159 
|
1,5 20 11.5 2 5,0 6 HL Board 06 topcoat 2 topcoat + chamfer to prevent material fracturing 185160 
|
2,0 20 11.5 2 5,0 6 HL Board 06 topcoat 2 topcoat + chamfer to prevent material fracturing 185161 
|
2,5 20 11.5 2 5,0 6 HL Board 06 topcoat 2 topcoat + chamfer to prevent material fracturing 185162 
|
3,0 20 11.5 2 5,0 6 HL Board 06 topcoat 2 topcoat + chamfer to prevent material fracturing 185163 
|