PSE14 - p-System Profile Cutters HW
Product
Drawing
-
- Tungsten Carbide [HW]
- MEC
Technical data
Description
Machine / Application
- machine
- EWD FR15, FR16
- Linck VPF340
- for milling of corners / profiling
Design
- one part and segmented
- turnover knives can be used on all four sides
- extremely scoring cut
- cutting material: HW HL Solid 20
Advantages
- no chippings due to knots
- considerable improvement of surface quality compared to the existing chipping knives
- small chips suitable for pellet production
- extremely long edge lives (up to 8 million running meters)
Notes
- chips are not suitable for paper industry
- feed rate per tooth fz = 2-8 mm
| Feature | Value | |
|---|---|---|
| Ø D = Cutting circle diameter | 402 [mm] | |
| B = Cutting width | 121 [mm] | |
| b = Hub width | 139 [mm] | |
| Ø d = Bore diameter | 120/200 [mm] | |
| Z = No. of teeth | 8+8 | |
| Shear∡ = Shear angle | 70 [°] | |
| L/R = cutting direction | L | |
| L = Delivery Status | ||
| Machine/Type | Linck | |
| Remarks | vertical axis bottom | |
|
Dimensions entered are not listed?
available from stock |
||
Turnover Knives
| Product picture | Description | Design | Ident-No. | ||
|---|---|---|---|---|---|
|
Turnover Knives HW with 4 cutting edges and countersink - EWD, Linck | 21x21x5.5N | 186111 | ||
|
available from stock |
|||||
Spare parts / accessories
| Product picture | Description | Design | Ident-No. | ||
|---|---|---|---|---|---|
|
Drilling fixture | 186444 | |||
|
|
Drilling fixture | 186446 | |||
|
Head Cap Screws | M14x60-12.9 DIN EN ISO 4762 | 185008 | ||
|
|
Head Cap Screws | M14x80-12.9 DIN EN ISO 4762 | 185181 | ||
| Conical Screws | M6x10 D7.8x20GRD 10.9 | 184891 | |||
| Countersunk Screws | M7x17 T30 10.9 | 185643 | |||
| Repair set | M7 | 185881 | |||
| Helicoil® | M7x10,5 | 50930340 | |||
|
available from stock |
|||||
